User`s guide

5. SYMPTOM: Missing horizontal line(s) of print

a. Possible Cause: If the horizontal line(s) runs

partially through label, there may be foreign

particles on the print head

Solution: Clean the print head

b. Possible Cause: Horizontal line(s) runs through

entire label (See Fig. 5)

Solution: Replace the print head

6. SYMPTOM: Wrinkles appear on one-half of label

a. Possible Cause: The ribbon wrinkles due to the

pressure of the print head being uneven

Solution: The Adjustable Pressure Knobs need

to be set

Set Left Adjustable Pressure Knobs:

For wrinkles on the right side of the label when

printed: Set the two left Adjustable Pressure Knobs.

1. Press down on the far left Adjustable Pressure Knob and while holding down, turn

the Adjustable Pressure Knob clockwise to the desired number

(amount of pressure).

2. Press down on the second-to-far left Adjustable Pressure Knob and while holding

down, turn the Adjustable Pressure Knob clockwise to the same number as the

far left Adjustable Pressure Knob was set to.

Front of printer

on this end

Fig. 6 Ribbon wrinkled

Fig. 5 Burnt-out pixel

Label dispensed

out this end ﬁ rst

Fig. 6 Ribbon Wrinkled

Two Left Adjustable Pressure Knobs

Fig. 7 Press down Fig. 8 Press down, while turning knob

clockwise

-55-