User`s guide

Platen Roller

1. Open a cleaning swab by placing swab between your foreﬁ nger and thumb.

Squeeze swab until it snaps. Alcohol will be distributed to cotton side of the swab.

2. Run the swab back and forth several times across the Platen roller to remove any

buildup. Rotate the Platen roller to clean all sides of the roller.

3. Give the Platen roller a couple minutes to dry, then reload your ribbon and supply.

Your DuraLabel 9000 is now cleaned and ready for use.

Fig. 9 Cleaning Platen Roller

The DuraLabel 9000 should be cleaned regularly to maintain optimal performance. The

print head, cutter mechanism, and platen roller should be cleaned with alcohol swabs

to remove buildup of adhesive, dust, and other substances. Always turn the printer OFF

before cleaning, performing maintenance, or loading supplies.

NOTE

-53-