User`s guide

5. Clean the front and underside of the Print Head.
Cutter
1. Open the Duralabel 9000 top
cover.
2. Rewind any supply that may
be loaded away from the
cutting mechanism.
3. Using a magnetic screwdriver,
remove the two recessed
screws on the front of the cutter mechanism.
Fig. 6 Remove the recessed screws which are located at the red circles
Fig. 5 Cutting Blades
at the printed label opening
Fig. 4 The entire area outlined in red should be cleaned
Fig. 3 The front of the print head should be
cleaned to remo
ve any ribbon residue
-51-