User`s guide

Configure Ethernet Card
The internal Ethernet card can be confi gured by using the front display panel buttons
and LCD on the DL9000.
‘MENU’ button on the front display panel will provide access to the printer menu. ‘UP’
and ‘DOWN’ buttons will navigate through the menu. To enter data, ‘UP’ button will
increment the highlighted digit by 1 and the ‘DOWN’ button will shift one over and
highlight the next digit. Pressing ‘SELECT’ will accept the selection. Pressing ‘MENU’
will take you to the previous screen.
Directions to confi gure the IP address:
1. Press the ‘MENU’ button
2. Select Main Menu
3. Select Setup
4. Navigate down to ‘Ethernet’, press ‘SELECT’
5. Select DHCP or Static IP
To set a Static IP
1. Highlight ‘Static IP’ and press ‘SELECT’
2. Set the IP address using the ‘UP’, ‘DOWN’, ‘MENU’ and ‘SELECT’ buttons as
described above.
-49-