User`s guide

Change Page Setup
Click on the File menu, then the Page Setup selection.
Now click the Margins tab. Set all of your margins and edges to 0. This will allow
you to print on the entire area of your tape with the exception of *9" supply. Set the
orientation t
o desired layout. Depending on your operating system, the orientation
may be on another Tab.
Select the Paper Size tab. Set your paper size to the size of the label you wish to create.
Either the width or the height should match the width of the tape supply you have loaded
in the machine.
*Settings required to print edge-to-edge for 9" supply
For the following orientations:
▪ landscape label: set height to 8.5"
▪ portrait label: set width to 8.5"
The maximum printable area is 8.66" (ribbon width)
Under “First Page” & “Other Pages”, either Default tray
(Continuous Roll) or Continuous Roll may be selected.
-30-