User`s guide

Set Up Microsoft Word Document
Once you open a new or existing document, you must change the paper size and
margins. Word processors will default to 8.5" x 11", but changing these settings is
generally very simple. The steps are outlined for Microsoft Word below:
Select Printer
Before you make any changes to the page layout you must first select the DuraLabel
9000 as your printer. The word processor communicates with the selected printer
driver to determine if margin and other settings are within the printers limits. To
select the DuraLabel 9000 click on the File menu, then the Print selection; which
will bring up the print dialog:
In the print dialog simply locate the pull-down selection and choose Graphic
Products DuraLabel 9000 as your printer. Click OK to continue.
You may find that changing these settings for certain types of supplies is optimal. For
a label with mainly text and not a lot of large, dark areas, you may want to decrease
the darkness by 1 or 2. If you have large areas of solid color to print, you may need to
increase the darkness by 1 or 2. You'll have to experiment to get the desired quality.
NOTE
-28-