User`s guide

6. Tape the end of the ribbon supply to the front of the empty supply core.
7. Roll the ribbon rewind spindle clockwise a few times, towards the back of the
printer to tighten the ribbon and remove fl aws and fi ngerprints.
8. With both hands on each side of the print head mechanism, close the print head
mechanism by pressing down.
NOTE: Make sure the print head release lever latches closed
9. Close the printer cover.
10. Turn the printer ON.
Print Head Mechanism
Print Head Release
Lever
Fig. 4 Print Head Mechanism closed
Fig. 3 Ribbon supply tightened
-12-