User`s guide

8. Pull the leading edge of the vinyl supply and thread the vinyl supply under the

media guide bar and through the adjustable media guides.

9. Pull the vinyl supply over the black platen roller and through the printed label

opening.

NOTE: Make sure the label supply threads under the green media sensor, located under the print head

mechanism.

10. Move the adjustable media guides to ﬁ t the width of the vinyl supply, securing the

vinyl in place.

Adjustable Media Guides (white)

Adjustable Media

Guides

(white)

Platen

Roller

Print Head

Mechanism

Supply Guides

Supply Bar

Media

Guide Bar

Media Guide BarPrinted Label Opening Platen Roller (black)

Media Sensor (green)

Fig. 7 Direction of loaded Vinyl supply

Fig. 8 Vinyl loaded properly

Fig. 11 Adjustable Media Guides ﬁ

tted properly to vinyl width

Fig. 9 Correctly ﬁ tted

Fig. 10 Not ﬁ tted properly

-8-