User`s guide

7. Maintenance

This session presents the clean tools and methods to maintain your printer.

1. Please use one of following materials to clean the printer.

 Cotton swab (Head cleaner pen)

 Lint-free cloth

 Vacuum / Blower brush

 Ethanol or a solution of IPA and water only

2. The cleaning process is described as following

Printer Part Method Interval

1. Always turn off the printer

before cleaning the print head.

2. Allow the print head to cool for

a minimum of one minute.

3.Use a cotton swab (Head

cleaner pen) and 100% ethanol

to clean the print head surface.

Clean the print head when changing a

new label roll

Print head

Platen Roller

1. Turn OFF power.

2. Rotate the platen roller and wipe it

thoroughly using ethanol or a

solution of IPA and water only with

a cotton swab, or lint-free cloth.

Clean the platen roller when

changing a new label roll

Sensor

Compressed air or vacuum Monthly

Exterior

Wipe it with water-dampened cloth

As needed

Interior

Brush or vacuum As needed

Note:

 Do not touch printer head by hand. If you touch it, please use ethanol to clean it.

 Please use ethanol or a solution of IPA and water only to clean the print head.

 Regularly clean the print head and supply sensors when changing the ribbon or vinyl to

maintain the printer’s performance and extend the life of the printer.