User`s guide

43
5. Printer Specifications
Printer model
DuraLabel 9000
Resolution 300 DPI
Printing method Thermal Transfer & Direct Thermal
Print speed Up to 3 ips
Max. print width 215.9mm (8.5”), Center Bias
Max. print length 1270 mm (50”)
Enclosure Sheet metal structure with plastic cover
Physical dimension
470mm(W) x 350 mm(H) x 550mm(D)
18.50” (W) x 13” (H) x 21.65” (D)
Weight 22kg (TBD)
Ribbon
 300 M long, 1” core (ink outside)
 Support color ribbon
Ribbon width 110mm ~ 254.0mm (4.33”~8.66”)
Ribbon take up direction Same as DLP200/300
Label roll capacity 152.4 mm (6” ) OD
Processor 32-bit ARM9 architecture micro processor, 200MHz
Memory
 8MB Flash memory
 32MB SDRAM
 SD flash memory card slot for flash memory expansion
Interface
 Centronics (SPP mode)
 USB 2.0 client (full speed)
 RS232C
Power
Internal switching power supply
 Input: AC 115V/230V, 5A/3A, 50HZ/60HZ
LCD display
 Graphic type, 122 x 32 pixel, with back light
 The number of printed label should be shown on LCD
display
 LCD supported language: English
Operation switch, button
Power switch at back side of printer
6 operation buttons (up, down, select, pause, feed, menu)