User`s guide

3.3 Diagnostics

Diagnostics

ExitPrint Config. Dump Mode Rotate Cutter

3.3.1 Print Config.

This feature is used to print the current printer configuration to the label supply. On the

configuration printout, there is a print head test pattern, which is useful for checking if

there is any dot damage on the print head heater element.

Diagnostics 1/4 Self Test ... Printing ...

> Print Config. 1/1

Dump Mode

Rotate Cutter

Self-test printout

Print head check pattern

Model name and F/W version

Printed mileage (meter)

Firmware checksum

Serial port configuration

Code page

Country code

Print speed (inch/sec)

Print darkness

Label size (inch)

Gap distance (inch)

Gap/black-mark sensor sensitivity

Numbers of download files

Total & available memory space