User`s guide

3.1.3.1 Baud Rate
Serial Comm. 1/5
> Baud Rate
Parity
Data Bits
Baud Rate 4/9
> 9600 bps
19200 bps
38400 bps
32
This option is used to set the RS-232 baud rate. The default setting is 9600 bps.
Press or to select the different baud rate and press to
set the value into the printer. When you enter this list, the baud rate value in the
right side of ">" icon is the current setting in the printer. Press to cancel.
3.1.3.2 Parity
Serial Comm. 2/5
Baud Rate
> Parity
Data Bits
Parity 1/4
> None
Odd
Even
This option is used to set the RS-232 parity. The default setting is “None”. Press
or to select the different parity and press to set the
value into the printer. When you enter this list, the parity in the right side of ">" is
the printer current setting. Press to cancel.
3.1.3.3 Data Bits:
Serial Comm. 3/5
Baud Rate
Parity
> Data Bits
Data Bits 2/3
7
> 8
Exit
This option is used to set the RS-232 Data Bits. The default setting is “8” data bits.
Press or to select the different Data Bits and press to
set the value into the printer. When you enter this list, the Data Bits in the right side
of ">" icon is the printer current setting. Press to cancel.