User`s guide

B. Bline Mode (also known as Black-Mark Mode, or labels with marks)
27
Press and to scroll the cursor to the sensor type. Press to
enter the black-mark sensor calibration mode.
B-1 Automatic
When you enter the [Automatic] option, you will see following message and
the printer will feed the black-mark label to calibrate the sensor sensitivity
automatically. When calibration process is completed, the LCD screen will
return to the previous menu.
B-2 Manual
In case “Automatic” sensor calibration cannot apply to the media, use
“Manual” function to calibrate the bline sensor manually.
When entering the [Manual] option, you will see following message. Please
complete these steps:
Paper Len.
00151 dot
1. Press to move the cursor
from left digit to right digit, and press
to set the value from “0” to “9”
and the “dot/ mm/ inch”. Press
to set the paper length into
the printer.
Bline Size
0024 dot
2. Press to move the cursor
from left digit to right digit, and press
to set the value from “0” to “9”
and the “dot/ mm/ inch”. Press
to set the bline size into
the printer.
Calibration 2/4
Gap Mode
> Bline Mode
Cont. Mode
Bline Mode 1/4
> Automatic
Manual
Pre-Printed
Bline Mode
Automatic
Bline Mode 2/4
Automatic
> Manual
Pre-Printed