User`s guide

3.1.1.5 Offset:

Print Setup 5/12

Direction

Print Mode

> Offset

Offset

+000

This option is used to fine tune media stop location. Press to move the

cursor from left digit to right digit, and press to set the value from “+” to “-”

or “0” to “9”. Press to set the value into printer. Press to

cancel. The default value is +000.

Note: If printing from enclosed software/driver, the software/driver will send out

the OFFSET command, which will overwrite the setting set from the

front panel.

3.1.1.6 Shift X & Shift Y:

Print Setup 7/12

Offset

Shift X

> Shift Y

Shift Y

+000

This option is used to fine tune print position. Press to move the cursor

from left to right, and press to set the value from “+” to “-” or “0” to “9”. Press

to set the value into printer. Press to cancel. The default

value is +000.

Note: If printing from enclosed software/driver, the software/driver will send out

the SHIFT command, which will overwrite the setting set from the front

panel.

3.1.1.6 Reference X & Reference Y:

Print Setup 9/12

Shift Y

Reference X

> Reference Y

Reference Y

000

This option is used to set the origin of printer coordinate system horizontally and

vertically. Press to move the cursor from left digit to right digit, and press

button to set the value from “0” to “9”. Press the button to set the

value into printer. Press key to cancel the setting and return to the