User`s guide

SETUP FOR PRINTING WHEN NOT CONNECTED TO A COMPUTER:
3.1.1.1 Speed:
18
Print Setup 1/12
> Speed
Density
Direction
Speed
2
Use this option to set print speed. The available print speed is 2 or 3 ips. The
default print speed is 2 ips.
Press key to raise the print speed, and press key to decrease
print speed. Press to accept, and press to cancel.
Note: If printing from enclosed software/driver, the software/driver will send
out the SPEED command, which will overwrite the setting set from the
front panel.
3.1.1.2 Density:
Print Setup 2/12
Speed
> Density
Direction
Density
8
Use this option to setup printing darkness. The available setting is from 0 to 15, and
the step is 1. Printer default density is 8. You may need to adjust your density
based on selected media.
Press or to increase/decrease the printing darkness. Press
to enable the setting. Press to cancel.
Note: If printing from enclosed software/driver, software/driver will send out
DENSITY command, which overwrites the setting entered from the front
panel.
3.1.1.3 Direction:
Print Setup 3/12
Speed
Density
> Direction
Direction
0
The direction setting value is either 1 or 0. Use this option to setup the printout
direction. Printer default printout direction is DIRECTION 0.
Press key to set the direction as 1, and to set it as 0, and