User`s guide

7
800.788.5572 DuraLabel.com
LOADING THE PRINTER
FIGURE 4 The inside supply guide is set for 6"
label supply.
Adjustable Media
Guides (white)
Platen Roller
Print Head Mechanism
Supply Guides
Supply Bar
Media
Guide Bar
D. Adjust the inside supply guide to cover the
number corresponding to the size of label
supply being loaded (see photo below).
E. Place the label supply onto the supply bar.
NOTE: Label supply should roll over the top
and toward the front of the printer.
F. Fit the outside supply guide onto the label bar, against the label supply but with
enough room for the label supply to rotate with ease.
Supply Guides
Supply Bar
Label Stock/Vinyl Supply
FIGURE 5 Loaded supply and outside supply guide placed on supply bar
FIGURE 6 Loaded vinyl supply moving right to left.
G. Pull the leading edge of the label supply and thread it under the media guide bar
and through the adjustable media guides.