User`s guide

41
800.788.5572 DuraLabel.com
CLEANING AND GENERAL MAINTENANCE
11.3 Platen Roller
A. Place a cleaning swab between
your forefinger and thumb and
squeeze until it snaps. Alcohol will
be distributed to the cotton side of
the swab.
B. Run the swab back and forth
across the platen roller several
times to remove any buildup.
Rotate the platen roller to clean all
sides of the roller.
C. Give the platen roller a couple minutes to dry, then reload your ribbon and supply.
Your DuraLabel 9000 is now cleaned and ready to use.
NOTE: To maintain optimal performance, the DuraLabel 9000 printer should be
cleaned after every two rolls of supply. The print head, cutter mechanism and
platen roller should be cleaned with alcohol swabs to remove buildup of adhesive,
dust and other substances. Always turn the printer OFF before cleaning, performing
maintenance or loading supplies.
FIGURE 9 Cleaning Platen Roller