User`s guide

38
DuraLabel.com 800.788.5572
CONFIGURING ETHERNET CARD
P. Review the information on the Completing the
Seagull Driver Wizard window that opens and
click Finish if the information is correct. If it isn’t
correct, revise the selections made in previous
steps and click Finish when the window’s
information is accurate.
Q. A Driver Wizard Completed Successfully
window appears, confirming the printer driver
installaton was completed successfully. Click
Close.
R. The previous window closes and a Completing the DuraLabel Driver Setup
Wizard window appears. Click Finish to complete the new driver installation.
10.3 Manually Conguring the IP Address
A. Press the MENU button.
B. Select Main Menu.
C. Select Setup.
D. Navigate to Ethernet, then press SELECT.
E. Select DHCP or Static IP.
10.4 Setting a Static IP
A. Highlight Static IP and press SELECT.
B. Set the IP address using the UP, DOWN, MENU and SELECT buttons as described
earlier.
FIGURE 17 Completing the Seagull Driver
Wizard Window
FIGURE 18 Driver Wizard Completed
Successfully Window
FIGURE 19 Completing the DuraLabel Driver
Setup Wizard Window