User`s guide

37
800.788.5572 DuraLabel.com
CONFIGURING ETHERNET CARD
J. The Add Standard TCP/IP Printer Port Wizard
appears. Click Next.
K. Enter the IP Address and Port Name in the Add
Port dialog box that appears, then click Next.
L. An Additional Port Information Required window
now opens. Select Standard: Generic Network
Card under Device Type and click Next.
FIGURE 11 Add Standard TCP/IP Printer
Port Wizard
FIGURE 12 Add Port Dialog Box
FIGURE 13 Additional Port Information
Required Window
M. Make sure the port information is correct on the
Completing the Add Standard TCP/IP Printer
Port Wizard window that appears, then click
Finish.
N. Select the newly created port on the Specify
Port window that now appears, then click Next.
O. Select Printer Name, set the printer as default
and choose printer sharing options on the
Specify Printer Name window that opens, then
click Next.
FIGURE 15 Specify Port Window
FIGURE 16 Specify Printer Name Window
FIGURE 14 Completing the Add Standard
TCP/IP Printer Port Wizard Window