User`s guide

DuraLabel.com 800.788.5572

INSTALLING DURASUITE LABELING SOFTWARE

6.5 Adjusting Print Speed

Choose print speed from the Options tab, clicking on the

arrow to the right of the Print Speed drop-down menu. A

2" per-second setting is recommended.

6.6 Adjusting Darkness

Change darkness settings from the Options tab, dragging the slider on the Darkness

bar (see Figure 14). Darkness can be adjusted in single increments from 0 – 15.

Keep the Graphics Format settings on Automatic.

Recommended Darkness Settings for Ribbon: (Print Speed Set at 2)

Ribbon

Standard

Black

White Red Blue Green Orange

Die-Cut

Labels

Darkness 5-8 5-8 5-8 5-8 5-8 5-8 9-12

FIGURE 14 Printing Preferences

dialog box, with Options tab chosen

7. Installing DuraSuite Labeling Software

DuraSuite Labeling Software lets you create professional-quality pipe markers and

arc flash, RTK, NFPA Diamond, GHS and custom labels, quickly and easily. Insert the

DuraSuite Labeling Software installation CD in your computer’s disk drive and follow

the directions that appear on your screen. Refer to the DuraSuite Labeling Software

User’s Guide for additional information.

NOTE: You may need IT administrator privileges to perform this installation.

FIGURE 15 Adjust darkness settings to match your ribbon type and your printing needs.

When satisfied with all your settings, click Apply, then OK. Your driver is now set up

and ready to create labels.

NOTE: You may need to change print settings to optimize the DuraLabel 9000 for

printing with some ribbons and specialty supply. Higher speeds generally require

higher darkness. If a ribbon wrinkles, lower the darkness. Increase darkness to

ensure all ink is being transferred from the ink ribbon.