User`s guide

17
800.788.5572 DuraLabel.com
CONNECTING THE PRINTER
H. Select the LPT1 port on the Specify Port
window that appears and click Next.
I. Select Printer Name, set the printer as default
and choose printer sharing options on the
Specify Printer Name window that opens, then
click Next.
J. Review information
on the Completing
the Seagull Driver
Wizard window
that opens and
click Finish if the
information is
correct. If it isn’t
correct, revise the
selections made
in previous steps and click Finish when the
window’s information is accurate.
K. A Driver Wizard Completed Successfully
window appears, confirming the printer driver
installation was completed successfully. Click Close.
L. The previous window closes and a Completing the DuraLabel Driver Setup
Wizard window appears. Click Finish to complete the new driver installation.
FIGURE 9 Select port LPT1 when
using a parallel cable to install a
driver.
FIGURE 10 Printer Name, Default
and Sharing Status
FIGURE 11 Completing the Seagull
Driver Wizard
FIGURE 12 Driver Wizard Completed
Successfully Window
FIGURE 13 Click Finish on the Completing
the DuraLabel Driver Setup Wizard window.
The driver installation is now complete.