User`s guide

DuraLabel.com 800.788.5572

LOADING THE PRINTER

F. Tape the end of the ribbon supply

to the front of the empty supply

core.

G. Roll the ribbon rewind spindle

clockwise a few times toward the

back of the printer to tighten the

ribbon and remove flaws and

fingerprints.

FIGURE 10 Ribbon being taped to front of supply core

FIGURE 11 Ribbon supply tightened

H. Press down to close, with a hand on each side of the print head mechanism.

NOTE: Make sure the print head release lever latches closed.

I. Close the printer cover.

J. Turn the printer ON.

Print Head Mechanism

Print Head Release Lever

FIGURE 12 Closed print head mechanism