User`s guide

11
800.788.5572 DuraLabel.com
LOADING THE PRINTER
C. Slide a ribbon supply roll onto the ribbon spindle, flush against ribbon guide, with
the leading edge hanging down toward the back of printer.
D. Pull the leading edge of the ribbon supply toward the back of the printer to
provide enough ribbon to go through the printer.
E. Pull it down and thread it underneath the print head mechanism and above the
ribbon sensor (black bar above green media sensor).
FIGURE 7 Ribbon supply pulled to back of printer
FIGURE 4 Ribbon supply being placed on ribbon spindle FIGURE 5 Loaded ribbon supply on ribbon spindle
FIGURE 6 Ribbon supply being pulled
toward back of printer
FIGURE 9
FIGURE 8 Ribbon being threaded underneath the
print head mechanism and above the ribbon sensor.
Media Sensor Ribbon Sensor