User`s guide

8
DuraLabel.com 800.788.5572
LOADING THE PRINTER
H. Pull the label supply over the black platen roller and through the printed label
opening.
NOTE: Make sure the label supply threads under the green media sensor, located
under the print head.
FIGURE 7 Vinyl properly loaded
FIGURE 8 Adjustable media guides tted to width of vinyl supply
Adjustable Media Guides (white)
FIGURE 9 Guide tted correctly
FIGURE 10 Guide not tted correctly
I. Move the adjustable media guides to fit the width of the label supply, securing the
label supply in place.
Media Guide BarPrinted Label Opening Platen Roller (black)Media Sensor (green)