User`s guide

- 5 -
4. Remove outside supply guide from the supply bar.
5. Adjust the inside supply guide to cover the number corresponding to the size
of vinyl being loaded. (see Figure 3 & 4)
6. Place the vinyl supply onto the supply bar.
Note: The vin
yl supply should roll over the top and towards the front of the printer.
7. Fit the supply guide onto the label bar, against the vinyl supply, but with
enough room for vinyl supply to rotate with ease.
Printer Cover
Supply Guide
Figure 2
Figure 3
The inside supply guide is
set for 6" vinyl supply/media.
Figure 4 The inside supply guide is
set for 8" vinyl supply/media.
Supply Guides
Supply Bar
Supply Bar
Vinyl Supply/Media
Figure 5