User`s guide

- 8 -

5. Tape the ribbon supply to the front of the empty ribbon supply core.

6. Roll the ribbon rewind spindle

(front spindle) clockwise a few times, towards the

back of the printer to tighten the ribbon and remove ﬂ aws and ﬁ ngerprints.

7. With both hands on each side of the print head mechanism, close the print

head mechanism by pressing down.

Note: Mak

e sure the print head release lever latches closed.

8. Close the printer cover.

9. Turn the printer ON.

Print Head Mechanism

Print Head Release

Lever

Figure 10

Figure 9

Ribbon Spindle

Ribbon Rewind

Spindle