Use and Care Manual

EN
TI-SHELF
2/2
MATERIAL:
– Stainless steel 304
– Powder coated aluminum
LENGTH:
2.76 in to 9.84 in - 7 cm to 25 cm
THICKNESS:
1.25 mm stainless steel, 2 mm powder coated aluminum
WEIGHT CAPACITY:
4.4 lbs, 2 kg
CARE AND MAINTENANCE:
Care must also be taken to ensure that cement removers used to clean the surface
of the ceramic tiles do not come into contact with the surface of the shelves.
Protective measures must be taken, in this case, to prevent any damage to the
surface.
PRODUCT DATA:
The design shelf by DURAL for
showers, kitchens and living areas
- Information Sheet -
INSTALLATION:
1. Clean out the joint where the shelf will go being careful not to puncture or
compromise any waterproofing that may be installed behind the tile. The joint
width must be at least 1.25mm for stainless steel and 2mm for aluminum TI-
SHELF.
2. Use an appropriate flexible adhesive in the joint.
3. Insert the TI-SHELF into the fresh adhesive.
4. Immediately clean and remove any adhesive from all visible surfaces to
prevent damaging the TI-SHELF surface.
5. Once the cure time has passed according to the adhesive manufacturer, the
TI-SHELF is ready for use.
Dural USA Inc
711 N Varnell Rd
Tunnel Hill, GA 30755
800.278.1956
www.dural.com
E
E
G
E
E
G
E
E
E
E
B
B
B
B
D
D
F
F
C
C
C
C
C
C
A = 2.76 in - 7 cm
B = 3.74 in - 9.5 cm
C = 4.92 in - 12.5 cm
D = 5.71 in - 14.5 cm
E = 7.87 in - 20 cm
F = 9.84 in - 25 cm