Installation Guide

6
DURABASE WP
Compound sealing mat for walls and
floors in indoor areas
DURABASE WP
A tiled oor is not inherently waterproof. In particular, where
there are junctions around ttings and at wall connections,
water can seep below the tiles and damage the underlying
foundation. DURABASE WP is a sealing tape which acts as
a water vapour barrier.
nSecurebondingtothesuboorandtiledsurface
n Also ideal for chemical-resistant surfaces
Sealing of walls and oors
In indoor areas, DURABASE WP can be used as a seal in
combination with the tiled surface on walls and oors.
Here, DURABASE WP offers secure bonding to the subsurface
and easy installation.
Sealing in areas with extremely high
moisture levels
Even in areas where moisture levels are more likely to be
extreme, DURABASE WP can still be used in conjunction
with a tiled oor for sealing walls and oor.
Tiles
Tile adhesive
Walls
DURABASE WP
DURABASE WP
Material: PP
/ PE
Colour: Yellow
Width: 100 cm
Roll: 5, 10, 30 m
2
Production of ooring surfaces that are
resistant to chemicals
When used in conjunction with epoxy resin mortar / grout
and suitable tiles, DURABASE WP can even be used to produce
a oor that is resistant to chemicals, as stipulated for the food
industry, for example.
Installation
Bond the DURABASE WP to the subsurface using exible
mortar. Then use exible mortar to lay the tiles onto the
DURABASE WP matting. Seal transitional areas between
the wall and oor with WP sealing tape, inward and outward
facing corners and pipe connections using the sealing liners.
Please refer to the installation instructions at www.dural.com.