Installation Guide

14
PLATON STOP
The matting system that protects parquet
and laminate flooring from damp and
provides footfall noise insulation
PLATON STOP
PLATON STOP is a matting system measuring around 2.5 mm
thick and which is ideal for the oating installation of all parquet
and laminate ooring surfaces. It was developed with a dual ob-
jective: to counter footfall and ambient noise and to signicantly
soften the impact of walking on parquet and laminate ooring.
The special dimpled structure noticeably absorbs shocks, making
it tangibly more comfortable to walk on the ooring. The footfall
noise generated is also reduced simultaneously. This matting
system, which is practically impermeable to water vapour,
facilitates the signicantly faster laying of parquet and laminate
ooring on fresh screed. With cement screed, it is even possible
to commence installation from 5 % CM residual moisture, which
can lead to a reduction in construction times by 3–4 weeks.
n Installation even from 5 % CM residual moisture
n As a general rule, 3–4 week reduction in construction times
n Practically impermeable to water vapour
PLATON STOP
Material: Polypropylene
Colour: Blue
Width: 100 cm
Height: 2 mm
Roll: 20 m
2
PSSeal
Special sealing tape
Material: Polypropylene
Colour: Blue
Width: 75 mm
Length: 18 mm
Installation
Lay the cut-to-size pieces along the length of the roll with an
overlap of around 5 cm. Lay mat starting points joint to joint
around the roll width. Seal overlaps and roll joints using PSSeal.
Then apply the selected surface ooring, taking into account
the respective specic requirements.
Please refer to the installation instructions at www.dural.com.