Installation Guide

13
DURABASE SW
Footfall and thermal insulation matting
system for dry indoor areas
DURABASE SW
DURABASE SW, the “silent ooring” is a matting underlay
system measuring just 1.5 mm thick and consisting of 3 layers
of polypropylene, with a further plastic-bonded quartz sand
layer, which has excellent sound and heat insulation properties.
It decouples the tiles from the ooring below, signicantly
reducing footfall sound. The matting system also markedly
insulates tiled oors from cold substructures.
The matting can be used on many oor surfaces, such as
screed or wood. It can be laid directly over old, existing ooring,
saving time.
n Only 1.5 mm thin
n Suppresses footfall sound and provides thermal insulation
n Bridges minor subsurface cracks
Installation
Bond the DURABASE SW to the subsurface using exible
mortar. Then use exible mortar to lay the tiles onto the mat-
ting. DURABASE SW is ideal for use in dry areas with tile sizes
of 20 x 20 cm and bigger. In damp areas, a seal between the SW
matting and the tiled surface is required.
Please refer to the installation instructions at www.dural.com.
DURABASE SW
Material: Synthetic bres
Colour: Grey
Width: 100 cm
Height: 1.5 mm
Roll: 15 m
2
and reduces
footfall sound up to
15 dB
*
Signicant
reduction
of footfall and
Lowers ambient