Use and Care Manual

www.dural.com
DURAL GmbH
Südring 11
D-56412 Ruppach-Goldhausen
Tel. [phone]
Fax [phone]
[e-mail]
05/2018
EXP
Since the usage and nishing of the product is not under our control, we accept no liability for the success of the work and can therefore only guarantee the nature of our products as per the accompanying product data sheets and in accordance with our general terms and conditions of sale. The properties listed here represent no guarantee with respect to the eventual use of our products. We reserve the right to make changes due to technical advances. Any other technical information given in the course of a consultation must be conrmed in writing. Colours shown here are restricted by the printing techniques and may differ from those exhibited by the products themselves. We also reserve the right to make alterations to the product technology or design. Only the current version of this data sheet is valid. Such versions are accessible by anyone via the internet. The issue of the latest data sheet invalidates all those that have been published beforehand.
APPLICATION::
DUROSOL square edge proles by Dural were especially developed for protection of tile edges.
They are suitable for all domestic and commercial areas. Because of their special angle and
different materials, it is possible to provide edge protection even in areas of permanent and
strong stresses. These special proles were designed to transfer impact stresses uniformly into
the tile covering and base material. This minimises the chances of damage to the decorative
covering.
Besides the protective function, the DUROSOL Square edge proles also meet the highest deco-
rative requirements. They provide clean transitions and limits, e.g. between carpet and parquet.
They can be used as edge protection as well as for surface denition. A limited range of DUROSOL
Square edge proles is also available as exible version - “Z-Flex“.
MATERIAL:
DUROSOL Square edge proles are available in the following versions: brass natural, brass high
gloss nish and chrome plated, aluminium natural, aluminium anodised and aluminium powder
coated, stainless steel and stainless steel with high gloss nish.
PROPERTIES:
Special proles of brass are also applicable in industrial structures. They are resisting to high point
loads and are mostly resistant against chemical substances occurring during tile xing. Important:
brass oxidizes when exposed to air, especially with high humidity. The surface is covered with a
patina (protective layer) thus changing the appearance.
DUROSOL Square edge proles made of brass with a chrome nish are extremely resistant to
mechanical loading. They should not be allowed to come into contact with products that contain
salt or hydrouoric acid, however, since these will damage the surface. To ensure that the high gloss
nish of the chrome layer is not impaired, residues of mortar and jointing compounds should be
removed from the surface immediately.
Square Edge proles – The perfect protection
- Information Sheet -
DUROSOL 1/2
2-30 mm
2,2 mm
Aluminium / Brass
Stainless steel
2-50 mm
3 mm