Product Brochure

www.dural.com
DURAL GmbH
Südring 11
D-56412 Ruppach-Goldhausen
Tel. [phone]
Fax [phone]
[e-mail]
06/2015
EXP
DURONDELL 2/2
Round edge proles (closed)
- Information Sheet -
DURONDELL brass proles are particularly well suited for use in areas that are subject to parti-
cularly rough treatment. One application that looks good is in bathrooms, where the proles can
be adapted to match the existing ttings. Important: brass oxidises in air, especially in humid
conditions. The surface then develops a patina and its appearance is thus altered.
DURONDELL stainless steel proles are particularly suitable for areas that are subject to large
amounts of chemicals and acids. Since they are also able to withstand the utmost mechanical
demands, stainless steel proles are used in the food industry, in hospitals, swimming pools and
breweries.
For all products and materials, the following applies: The suitability of the material with regard
to the expected mechanical loading and chemical exposure must be investigated carefully in
each individual case. The generally recognised rules of good engineering practice must always be
observed!
INSTALLATION:
1. DURONDELL proles should be chosen to match the thickness of the tiles.
2. Tile adhesive should be applied around the junction using a serrated trowel.
At outside corners of walls, complete the tiling of the walls rst.
3. Press the DURONDELL prole into the adhesive bed and align it.
4. Spread mortar over the entire surface of the joint.
5. Press in tiles rmly and align them so that they are ush with the top edge of the prole.
Lay the tiles without leaving any gaps.
6. Allow a joint of 2-3 mm around the prole itself.
7. Then ll the space between the tiles and the prole with grout.
MAINTENANCE:
DURONDELL proles do not require any special maintenance. If they become dirty, they can be
simply cleaned with conventional cleaning agents. Cleaning agents should be free of hydrochloric
and hydrouoric acid (and solvents in the case of PVC) and should not contain abrasives. Layers
of oxidation on brass or aluminium proles can be removed with brass polish, though it is not
possible to eliminate such oxidation on a permanent basis.
Chrome polish can be used for stainless proles to make them look nice and shiny. If stainless steel
proles are likely to come into contact with particularly aggressive substances, they should be
periodically cleaned with mild cleaning agents. This reduces the risk of corrosion. Cleaning agents
should be free of hydrochloric and hydrouoric acid and should not contain abrasives.
PRODUCT DATA:
MATERIAL: PVC
Aluminium anodised, high gloss anodised, powder coated
Brass natural, Brass high gloss anodised („Star“ with peel-off strip)
Stainless steel natural, V2A (1.4301)
Stainless steel high gloss anodised („Star“ with peel-off strip), V2A (1.4301)
Stainless steel brushed (240 K) („Star“ with peel-off strip), V2A (1.4301)
PROFILE HEIGHTS: PVC: 6 / 8 / 10 / 12,5 mm
Aluminium / brass: 6 / 8 / 10 / 12,5 mm
Stainless steel: 6 / 8 / 10 / 11 / 12,5 mm
Stainless steel brushed: 8 / 10 / 12,5 mm
PROFILE LENGTH: 250 cm
ACCESSORIES: Internal and external corner
Stainless steel
6 – 12,5 mm
6 – 12,5 mm
Brass
Internal corner
External corner