Use and Care Manual

www.dural.com
DURAL GmbH
Südring 11
D-56412 Ruppach-Goldhausen
Tel. [phone]
Fax [phone]
[e-mail]
06/2015
EXP
SQUARELINE 2/2
Square-shaped prole
for modern edging design
- Information Sheet -
PRODUCT DATA:
MATERIAL: Natural aluminium / silver anodised aluminium /
high-gloss silver or gold anodised aluminium /
ne-ground stainless steel V2A (1.4301) / Hard PVC (no emollients)
HEIGHT OF PROFILES: Aluminium: 4.5 / 7 / 9 / 11 / 12.5 mm
Stainless steel: 9 / 11 / 12.5 mm
PVC: 7 / 9 / 11 mm
COLOURS (PVC): white, jasmine, black, silver/grey
LENGTH OF PROFILES: 250 cm
APPLICATIONS: Dividing, protective and edging proles
Stain less-steel proles are used not only in homes, but in the food industry, hospitals, swimming
pools, breweries and other applications where particularly exacting requirements must be met with
regard to cleanliness, hygiene, resilience and chemical resistance. Note: Depending on the type and
extent of chemical exposure, the use of type 1.4571 (V4A) stainless-steel is recommended.
PVC SQUARELINE proles offer a wide range of colours and can thus be perfectly matched to the
colours of the tiling. N.B.: The use of coloured mortar with ultra ne colour pigments in conjunc-
tion with plastic proles may result in permanent staining of the proles. We recommend taking
appropriate protective measures as a precaution.
SQUARELINE corner pieces provide a neat and technically accomplished solution for inside and
outside corners, without having to cut and mitre the proles. Use of the appropriate corner pieces
even makes it possible to design corners in all three dimensions.
For all products and materials, the following applies: The suitability of the material with regard
to the expected mechanical loading and chemical exposure must be investigated carefully in
each individual case. The generally recognised rules of good engineering practice must always be
observed!
INSTALLATION:
1. Select the SQUARELINE prole appropriate to the tile thickness.
2. Apply tile adhesive with a serrated trowel.
3. Press the SQUARELINE proles into the adhesive bed and align them correctly.
4. Trowel over the attachment base.
5. Press the tiles in rmly and align them in such a way that they are ush with the surface of the
proles. Lay tiles across the entire surface.
6. Use the matching inside and outside corner pieces.
7. Allow a gap of about 2–3 mm between the tiles and prole.
8. Fill the gap between the tiles and prole with grout.
MAINTENANCE:
SQUARELINE proles do not require any special care. They can easily be cleaned when
necessary using clear, clean water with a few drops of washing up liquid. Cleaning agents must
specically be free of hydrochloric or uoric acid and must not be abrasive. No cleaning agents
containing solvents may be used in conjunction with PVC proles. Observe the manufacturers’
own maintenance instructions.