Use and Care Manual
www.dural.com
DURAL GmbH
Südring 11
D-56412 Ruppach-Goldhausen
Tel. +49 (0) 2602/9261-0
Fax +49 (0) 2602/9261-50
info@dural.com
06/2015
EXP
Since the usage and nishing of the product is not under our control, we accept no liability for the success of the work and can therefore only guarantee the nature of our products as per the accompanying product data sheets and in accordance with our general terms and conditions of sale. The properties listed here represent no guarantee with respect to the eventual
use of our products. We reserve the right to make changes due to technical advances. Any other technical information given in the course of a consultation must be conrmed in writing. Colours shown here are restricted by the printing techniques and may differ from those exhibited by the products themselves. We also reserve the right to make alterations to the
product technology or design. Only the current version of this data sheet is valid. Such versions are accessible by anyone via the internet. The issue of the latest data sheet invalidates all those that have been published beforehand.
SQUARELINE 1/2
Square-shaped prole
for modern edging design
- Information Sheet -
APPLICATION:
SQUARELINE proles from Dural are designed for dividing areas, protecting edges and for edging.
They are square in prole and the equal dimensions on all four sides allow for corners to be highly
attractive in appearance. They are ideal for use wherever walls need to meet the utmost aesthetic
requirements.
When SQUARELINE proles’ square format is aligned with tiled and natural stone surfaces, the
results are rst rate and elegant in design. Apart from their decorative attributes, they also provide
perfect protection for corners and surface edges.
MATERIAL:
SQUARELINE proles are available in the following materials: natural aluminium, silver anodised
aluminium, high-gloss anodised silver aluminium and gold, ne ground stainless steel and hard
PVC (no emollients).
Aluminium SQUARELINE proles can be in any location where the environment is not expected to
be too tough. To avoid staining (corrosion) of the prole surface care must be taken with cement
materials. Since aluminium is sensitive to alkaline substances, any residues from mortar,
tile adhesive or grout should be wiped from visible surfaces immediately. The proles should
be fully embedded in the adhesive layer. This prevents the creation of any pockets in which alkaline
water solutions could collect (especially in areas where there is a lot of water present).
Anodised aluminium SQUARELINE proles are specially treated so that surfaces should not nor-
mally change. Visible surfaces, though, must nevertheless be protected from all cement materials.
Damage can also occur due to grating or abrasive grout or other objects.
SQUARELINE proles made of stainless-steel are the ideal choice for sophisticated and appealing
entrance areas. They also meet the highest requirements with regard to mechanical loading.
Aluminium
Stainless steel
PVC
Corner piece