Prime Tundra Plug N Fly Instruction Manual

Step 2: Attachment of the Horizontal Stabilizer

and Tailwheel.

7.Identify the pack of four 3x10mm machine

screws.

8.Using the 3x10mm screws, attach the U/C

assembly to the bottom of the fuselage. Please

note the direction of the cut out in the center.

1.Identify the parts for the horizontal stabilizer.

2 x horizontal stabilizer halves, 1 x 210x3mm

carbon rod, 3 x 2.6x8mm self tapping screws

with molded on washers.

2.Slide the 210x3mm carbon rod through the

hole in the rear of the fuselage.

3.Slide one half onto the carbon rod. 4.Repeat for the other side, ensure that the two

elevator joiners slide inside each other as you

do this.