Excalibur V2 PNF Building and Set-Up Manual

Forged by Kings in a distant realm, the legendary Excalibur has proven to be a force to be reckoned

with, it is now available in an updated version which includes a brand new eye-catching color scheme,

extra carbon and glass fiber reinforcement, and

an improved propeller assembly, the Excalibur V2 has

arrived!

The Excalibur V2 is the perfect marriage of modern design and materials, with rock solid engineering

and performance. The entire model features carefully positioned carbon and glass fibre reinforcement

through-out, super smooth EPO foam for the lowest drag possible, quick connect PCB wing plugs,

efficient ball links on all surfaces, and a simple

screw together assembly.

This, is all wrapped up in the sleekest looking hotliner to date. The Excalibur's forward swept wing and

V-tail design coupled with the mighty pre-installed high torque power system, impresses at every level.

It is these lasting impressions from which legends are born.

Whether on the slope or at the field, rule the sky with the Durafly Excalibur V2.

INTRODUCTION:

- Wing span: 1600mm(63.5”)

- Length: 1010mm(40.1”)

- Flying weight: 1320g(46.6oz)

- Controls: 4 Channels - Ailerons,Elevator,Rudder (V-Tail),Throttle.

- ESC: Aerostar 60amp Brushless ESC.

- Motor: 3542 800kv Brushless outrunner

- Prop: Aerostar Folding Carbon 13x8

- Battery: 1800-2200mAh, 4S LiPo, 40-65C.

- Radio system: Minimum 4 channel Rx and Tx required with V tail mixing.

- Servos: 4 x 9g high torque.

FEATURES: