tomahawk_manual-180411

P.01

"FPV flying is the new way of looking at the world. The Durafly Tomahawk is the best way to get into

mini racing FPV flying wings. This wing is only 670mm so it can be easily fitted in your car for an after

work flight. The wing is designed for stable flying and also allows for all the extreme maneuvers

needed when racing."

REQUIRED TO COMPLETE MODEL :

1. Main wing with preinstalled motor, ESC and servos

2. Upper vertical fins

3. Lower composite vertical fins

4. Optional Action camera battery hatch

5. Ball link control arms

6. Propeller

7. Sticker kit

Transmitter-

OrangeRX TX6i

Full Range 2.4GHz DSM2/DSMX

compatible 6ch Radio System

9171001328-0 ( mode 2 )

9171001327-0 ( mode 1 )

Receiver-

OrangeRX R620X V2 6ch 2.4Ghz

DSM2/DSMX Comp Full Range Rx

w/Sat, Div Ant, F/Safe & SBUS

9171000901-0

Battery-

Turnigy Grapene 1000mAh 4S 65C

Lipo Pack w/XT60

9067000124-0

Battery-

Turnigy 1300mAh 4S 45C Lipo Pack

9067000177-0

The Durafly Tomahawk “Plug and Fly” model will still require a few components to complete this

model and have it ready for flight.

Durafly recommends the following products avalible at www.hobbyking.com

CONTENT :

Specifications :

- Wingspan-670mm

- Length - 360mm

- ESC-20A

- Motor-Multistar 2206 2150kv Brushless outrunner

- Propeller-5045BN CCW

- Servos- 2 x 9g

- Weight - 220g