bf109 manual V1.1

Messerschmitt Bf-109e
Durafly 1100mm
5
8. Glue the sand filter of the desert version into place.
9. The bomb been secured to the rack ( the bomb securer’s tougue perpendicular to the axle of the bomb)
Insert the servo lead into any of the two switch channel, then you can release the bomb (The tougue of
the bomb will align with the axle of the bomb after the releasing).
10. Install the bomb rack by insert the release servo’s lead to the receiver hatch, and be sure the lead
will not caught between the servo hatch and the servo(A). Secure the rack with supplied screws
2.3X6mm(B). Then adjust the screws on the rack(C), to make sure the bomb align with the
centerline of the fuselage(D).