bf109 manual V1.1

Messerschmitt Bf-109e

Durafly 1100mm

DECAL APPLICATION GUIDELINES

Applying the supplied decals will take you longer than assembling the model. This is because great

care must be taken when doing so. The decals are a mix of two different types, vinyl and sticker,

each needing to be applied in a certain way. Please follow carefully the guidelines below to achieve

the best possible finish on your Durafly Bf-109e.

Note:

* All wing and fuselage roundels are made of standard sticker type decals and cut exactly to

the right size and simply need lifting from the backing paper and applying in place.

* All other markings are of the vinyl type decal and are supported on a clear adhesives

fronting film. These will need more care and attention when applying.The below guidelines

apply to both decal types where noted:

1. Study the scheme reference sheet carefully and understand fully where each decal should be

applied (sticker/vinyl).

2. Both decals types have been die cut so there is no need to cut the decals out.

60-65mm