Use and Care Manual

OPERATION INSTRUCTIONS
1. To switch ON the heater, adjust the thermostat
until a clicking noise is heard.
- Turn the thermostat clockwise to increase
temperature setting. OR
- Turn the thermostat counter-clockwise to
reduce the temperature setting.
2. To switch OFF the heater, turn the thermostat to
full counter-clockwise.
The heater will be turning on/off automatically
once the unit reaches to the desired setting.
E-5
CARE AND MAINTENANCE
WARNING: Do not attempt to disassemble this product for any reason, as incorrect
re-assembly could cause a risk of re or electric shock. Only qualied service personnel
should perform any servicing.
WARNING: Always unplug the product from the electrical outlet and allow it to cool
before cleaning or storing it.
NOTICE: This product is permanently lubricated at the factory before shipping and will
not require further lubrication for the life of the product.
Clean only the exterior surface by wiping with a soft, damp cloth, and allow the product
to dry completely before storing or using. Dust can be removed from any vents using a
small vacuum.
WARNING: Do not allow water or other liquids to enter the interior of the product.
NOTICE: Do not use abrasive cleaners/pads to clean the product.
To store, wind and secure the power cord using a twist tie or rubber band, and then
place the product in a cool, dry location.
Figure C
OFF
OFF