Installation Guide
E-3
19. Do not operate this product if it has a damaged power cord or plug, if it malfunctions,
or if it has been dropped or damaged. This product has no user-serviceable
parts. Do not attempt to examine or repair this product yourself. Only qualied
service personnel should perform any servicing; take the product to an appliance
repair shop of your choice for inspection and repair.
20. This appliance is not intended for use by persons (included children) with reduced
physical, sensory or mental capability, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
21. Children should be supervised to ensure that they do not play with the appliance.
22. This product is intended solely for indoor, non-commercial, non-industrial use in
temporarily heating rooms. Do not use this product outdoors.
23. Do not operate the product continuously. Portable electric heaters are designed for
nite space heating or as a supplementary heat source. They are not intended to be
main sources of heat during the normal heating season.
24. Do not hang or wall-mount the product.
25. Place the product upright on a at, level, stable, heat-resistant surface.
See directions in Figure A.
This heater is for use on 240 volts. The cord has a plug as shown in Figure. A. No
adapter is available for this blade conguration, and none should be used. The type
outlet is a 240 V grounding outlet. When properly installed, it provides a ground
connection through the cord to the heater to protect the operator from electric shock.
SAVE THESE INSTRUCTIONS
Figure A
Grounding Pin