Instructions / Assembly

www.tsicustomerservice.comREV-0
5
OPERATION INSTRUCTIONS
FUNCTION
POWER
OSCILLATION
ICON DESCRIPTION
FAN
Pressing this button will turn on or o the oscillation feature.
When on, the louvers will oscillate back and forth to
distribute the air ow to a wider area.
Use the POWER button to turn on or o the replace from
the remote or control panel.
NOTE: Holding the POWER button on the control panel for
10 second will disable the heater function. Once disabled the
emberbed will ash several times. To re-enable the heater
press and hold the POWER button for another 10 seconds.
HEATER
To turn on the heater press the HEATER button. Once
pressed the heater will turn on, the indicator will also be
ashing the current thermostat setting level. Use the
HEATER button to set the desired thermostat level.
e default temperature is 72°F (22°C). e thermostat
setting range is 62°F - 82°F or 17°C - 27°C or continously
ON.
e button on the remote only turns the heater on/o to the
thermostat setting selected with the control panel.
To change between °F and °C press and hold the HEATER
button on the control panel for 10 seconds.
Press the fan button to cycle through the fan intensity
settings between HI and LOW.
To set the sleep timer press the TIMER button. Once pressed
the indicator will ash the current timer setting length, use
the TIMER button to adjust the timer length.
Pressing the timer button will cycle through the timer
settings; 30 minutes, 1 Hour, 2H, 3H, 4H, 5H, 6H, 7H, 8H, 9H
and o.
TIMER