Operating Guide
www.tsicustomerservice.comA392
8
CARE AND MAINTENANCE
• Clean the trim using a so cloth, slightly dampened with citrus oil based product and bu with a clean so cloth.
• DO NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based
products can be obtained at supermarkets or hardware stores.
• WARNING: Electrical outlet wiring must comply with local building codes and other applicable regulations to
reduce the risk of re, electrical shock and injury to persons.
• Warning: Disconnect power before attempting any maintenance or cleaning to reduce the risk of re, electrical
shock or personal injury.
TROUBLESHOOTING
Problem Root Cause Corrective Action
Iris indicator light double
ashing.
In pairing mode.
Follow the pairing instructions in getting started or choose to not pair to an Iris
hub. Aer 10 minutues the pairing mode will stop.
Iris indicator light not lit. No longer pairing.
To begin pairing again unplug the heater then plug back in and it will be in
pairing mode for 10 minutes.
How to remove from the
Iris network?
Not applicable.
is is done by the user through the Iris website:
With ZigBee devices, this is accomplished by a customer clicking “Remove
Device” from the Iris website. e Iris hub sends a message to the device to
remove itself from the network, and the device is removed from the memory of
the Iris hub. No physical action is required on the device to remove it from the
network.