Operating Guide
www.tsicustomerservice.comA392
5
OPERATION INSTRUCTIONS
FUNCTION
POWER
e power button supplies power to all of the functions
of the replace. e power button will put the insert in a
standby mode. is will turn o all functions at once but
will hold the settings in the memory. By pressing the
Power button again the unit will turn on at the same
settings.
To change between °F and °C press and hold the POWER
button on the control panel for 3 seconds.
Press TIMER button will turn on or o timer settings.
ere are 10 timer settings and OFF that can be selected.
OFF(00), 30min, 1Hour, 2H, 3H, 4H, 5H, 6H, 7H, 8H, 9H.
TIMER
ICON DESCRIPTION
When pressing the up and down buttons the display
will enter temperature setting mode.
When in temperature setting mode pressing the
buttons will change the thermostat by 1 °F (1 °C.)
e temperature setting range is between 50 °F - 97 °F
(10 °C - 36 °C).
Aer 10 seconds without control input the display will exit
temperature setting mode and show the current ambient
temperature.
SETTING
TEMPERATURE
Aer the heater has ran the fan will continue to run for a
period of time to cool down the internal parts.
COOL DOWN CYCLE
ECO MODE
Pressing this button will turn on/ o the ECO setting.
When enabled ECO Mode will use less energy when
running to maintain warmth.