Installation Guide

www.tsicustomerservice.comA524
6
OPERATING INSTRUCTIONS
FUNCTION
POWER
e POWER button supplies power to all of the functions
of the replace. e power button will put the insert in a
standby mode. is will turn o all functions at once but
will hold the settings in the memory. By pressing the
power button again the unit will turn on at the same
settings.
With the power on, press and hold the power button on the
control panel for 10 seconds or until the heater indicator
ashes to disable or re-enable the heater function.
Pressing the DOWNLIGHT button will turn on / o the
downlight.
DOWNLIGHT
ICON DESCRIPTION
Pressing the HEAT button will turn on / o heat output.
HEATER
6 light levels can be selected:
Setting 1- 3 decrease in brightness with ickering.
Setting 4-6 decrease in brightness without ickering.
CANDLELIGHT
COOL DOWN CYCLE
Aer the heater has been in use the fan will continue to run
for a COOL DOWN CYCLE period of time to cool down
the internal parts.