Instructions / Assembly

www.tsicustomerservice.comA212
5
OPERATION INSTRUCTIONS
FUNCTION
POWER
Use the POWER button to turn on or o the unit from the
remote or control panel.
To set the sleep timer press the TIMER button. Once
pressed the display will ash the current timer setting length,
press the button to set the desired timer.
Timer settings are 0H,30,1H, 2H, 3H, 4H, 5H, 6H, 7H, 8H
and 9H.
FLAME
ICON DESCRIPTION
To turn on the heater press the TEMPERATURE button.
Once pressed the display will ash the current setting
temperature; press the TEMPERATURE button to cycle
through the settings.
Pressing and holding the TEMPERATURE button on the
control panel for 5 seconds will switch between deg oF to oC.
e thermostat setting range is 60°F - 82°F or 16°C - 28°C or
always ON.
To adjust the ame brightness press the FLAME button.
Once pressed the display will ash the current brightness
setting. Press the FLAME button again to adjust the
brightness.
ere are 5 brightness settings, 5 is brightest and 1 is
dimmest.
TEMPERATURE
TIMER