polishedpro | 5.
Table of Contents Technical Data Sheet 3 General Information 4 Recommended Tool List 5 Installation Instructions 6 Maintenance Instructions 10 Product Warranty 11
polishedpro | 5.2mm Rigid Core Technical Data Sheet General Specifications Overall Product Thickness: Underlayment Thickness: Wear Layer Thickness: Product Type: Product Dimensions: Finish: Residential Warranty: Commercial Warranty: Carton Quantity - Plank: Carton Weight: 5.2 mm 1.0mm XPO Foam 20 mils (0.5 mm) Rigid Core Floating Floor 5.75" x 47.75" Scratch-Resistant Polyurethane Lifetime 10 Years 10 Pieces (19.07 sq. ft.) 33 lbs.
polishedpro | 5.2mm Rigid Core General Information Limitations The optimal operating temperature for use is between 40°F to 90°F (4°C to 32°C). Avoid prolonged exposure to direct sunlight or other heat sources where temperatures will exceed 90°F (32°C), as discoloration or damage may occur. This product is not suitable for heavy rolling loads or heavy commercial areas. Do not install in areas that may be subjected to sharp, pointed objects, such as stiletto heels, cleats or spikes.
polishedpro | 5.2mm Rigid Core Recommended Tool List • Knee Pads • Safety Glasses • Cut-Resistant Safety Gloves • Dust Mask • HEPA-Filtered Vacuum • Oscillating Multi-Tool or Hand Saw (for door jambs) • Jigsaw with Carbide Blades(for complicated cuts) • 2 lb. (~32 oz.
polishedpro | 5.2mm Rigid Core Installation Instructions 1. Substrate Preparation General Substrate Guidelines Ensure the substrate is clean, dry, flat, sound and suitably prepared according to these instructions prior to installation, as manufacturer is not responsible for problems related to substrates that have not been properly prepared.
polishedpro | 5.2mm Rigid Core Installation Instructions vinyl or linoleum, as well as existing hard surface flooring substrates, such as terrazzo, porcelain or ceramic tile. Ensure existing flooring is a single layer and is clean, dry, sound, solid and well adhered. All loose material must be removed and repaired or replaced. All grout lines and wide seams greater than 1/4-in.
polishedpro | 5.2mm Rigid Core Installation Instructions ≥ 1/2-in. expansion gap. Expansion Joint When the total flooring length or width exceeds 85 feet, a compatible t-molding must be installed to create an expansion joint. Expansion joints must be wide enough to accommodate an appropriate accessory and allow for the appropriate expansion gap on either side. Accessories must cover the flooring material by at least 1/8-in. on each side and must be glued or anchored directly to the substrate.
polishedpro | 5.2mm Rigid Core previous row, and follow the "Side Joints" detail below. Side Joints (Angle) Starting at the left corner, typically with a cut piece, insert the side without an extended locking mechanism (tongue) into the previous row at a ~25° angle. Make sure it is properly seated and slides freely, then slide the piece into position. The end joint must either be flush with the wedge spacer (first piece) or be closely aligned with the end of the previous piece.
polishedpro | 5.2mm Rigid Core free of all dirt and debris. Routinely clean chair castors and furniture legs to ensure that dirt or debris has not built up or become embedded in castors or floor protectors. Replace chair castors and floor protectors at regular intervals, especially if they become damaged or heavily soiled. Felt floor protection devices may need to be replaced 3 or more times a year to prevent accumulation.
polishedpro | 5.2mm Rigid Core Maintenance Instructions 1. Precautions Remove all metal objects before conducting maintenance and use caution tape and/or “Wet Floor” signs to prohibit foot traffic until the floor is dry. Do not use hydrocarbons, harsh disinfectants, cleaning agents, dyes, acetone or other harsh chemicals – ensure all chemicals and materials that may come in contact with flooring surface will not stain, mar or otherwise damage the surface.
polishedpro | 5.2mm Rigid Core Product Warranty 1. General Terms 2. Warranty Terms & Provisions DuraDecor (“Manufacturer”) warrants that, when used properly and under normal operating conditions, the flooring products described in the Manufacturer’s catalog as PolishedPro Rigid Core Flooring (“Product”), a 5.2mm thick rigid polymeric core floating floor covering that includes a 0.
polishedpro | 5.2mm Rigid Core Product Warranty Residential Wear Coverage: Light Commercial Wear Coverage: ≤ 1-year: 100% ≤ 1-years: 100% ≤ 5-years: 70% ≤ 3-years: 70% ≤ 10-years: 50% ≤ 5-years: 50% ≤ 20-years: 30% ≤ 7-years: 30% > 20-years: 10% ≤ 10-years: 10% 2.4. Labor Warranty Term & Provisions: Labor costs shall not be reimbursed for all material installed with visible and obvious (> 0.5-inch) defects.
polishedpro | 5.2mm Rigid Core Product Warranty 4. Slip Resistance Warning Walking is an enormously complex activity involving many muscles, bones and nerves, as well as kinesthetic sensory information. There are several significant factors that directly affect slip resistance properties, such as the type, texture and surface structure of floor covering, surface contaminates, type of shoe soles and the walker’s weight, age, gait, fitness level, awareness, and vision.
