Full Product Manual

polishedpro | 2.5mm LVT
DuraDecor | P: (855) 700 - 5666 | [e-mail] | duradecor.com | revised on 06.23.23 | Page 3
Technical Data Sheet
General Specifications
Overall Product Thickness:
Wear Layer Thickness:
Product Type:
Product Dimensions:
Finish:
Residential Warranty:
Commercial Warranty:
Carton Quantity - Plank:
Carton Weight:
Technical Specifications
ASTM F1700 - Solid Vinyl Tile Specication:
ASTM F2055 - Size:
ASTM F387 - Thickness of Resilient Flooring:
ASTM F410 - Wear Layer Thickness:
ASTM F2055 - Squareness:
ASTM F1914 - Residual Indentation:
ASTM F137 - Flexibility:
ASTM F2199 - Dimensional Stability:
ASTM F925 - Chemical Resistance:
ASTM F1514 - Resistance to Heat:
ASTM F1515 - Resistance to Light:
ASTM F970 - Static Load (Modied):
ASTM E648 (NFPA 253) - Critical Radiant Flux:
ASTM E662 (NFPA 258) - Smoke Density:
ASTM D2047 / UL 410 - Slip Resistance:
2.5 mm
20 mils (0.5 mm)
Glue Down Luxury VInyl Tile (LVT)
6" x 48"
Scratch-Resistant Polyurethane
Lifetime
5 Years
16 Pieces (32 sq. ft.)
29.1 lbs.
Class III, Type B
Passes, ± 0.4 mm
Passes, ± 0.13 mm
Passes, ≥ 0.5 mm
Passes, ± 0.25 mm
Passes, ≤ 0.2 mm
Passes, 25.4 mm mandrel
Passes, < 0.5 mm / lin. ft.
Passes ASTM F1700 requirements
Passes, < ∆E 8
Passes, < ∆E 8
≤ 0.4 mm indent, 1600 lbs.
Class 1, > 0.45 W/cm2
Passes, < 450
> 0.5 SCOF (no ramps)
Disclaimer: These test results were independently tested, using material from standard production, in accordance with
product-specic standard test methods. Physical and performance testing may vary, within tolerances, depending on
the testing apparatus and/or production lot used. Be sure to use the most recently published versions of all reference
documents, specications and test methods. To purchase the most recent version of the above mentioned ASTM and ISO
standards, please visit www.astm.org. or www.iso.org, respectively. Test reports are available upon request.