Owner`s manual

This "ON/OFF" cycle will
continue periodically
while the humidifier is in
use.
• Lower the Humidity
Level setting if you notice
condensation forming on
walls or windows.
• The humidifier will
automatically shut off and
the REFILL light will illumi-
nate when the unit is near
empty. Refill the water
tank and restart, if you
wish to continue using the
humidifier.
• ALWAYS be sure to dis-
card any unused water in
the base each time you
refill the water tank or fin-
ish using the humidifier.
We recommend that you
clean the humidifier once
a week, or more often if
you:
• have hard water,
• notice a build-up of
impurities, or
• detect unpleasant
odors.
Using DuraSept™
Humidifier Bacteriostatic
Treatment (#AC-802) will
control the growth of bac-
teria, algae, and odors
and extend the life of the
Natural Cool Moisture™
Filters.
NOTE: THE USE OF OTHER
WATER TREATMENT PROD-
UCTS MAY CAUSE DETERI-
ORATION OF THE FILTER
OR DAMAGE THE HUMIDI-
FIER; THEREBY, HINDER-
ING THE HUMIDIFIER'S
EFFECTIVENESS.
DO NOT USE SOAP,
DETERGENTS, OR
ABRASIVE CLEANSERS.
Cleaning involves two
steps: SCALE REMOVAL
and DISINFECTING. Be
sure to perform these in
the proper order to avoid
harmful chemical interac-
tions.
• First, turn off and
unplug the humidifier.
• Remove the Power Unit
and Top Grill from the
base; remove the water
tank by grasping the
handle and pulling
straight up.
• Lift out the Natural
Cool Moisture™ filter
assembly and three filters;
remove the filters from the
assembly and set aside.
• Replace the empty
Natural Cool Moisture™
filter assembly in the base.
Step One: WEEKLY
SCALE REMOVAL
(Water Tank, Reservoir
Base, and Filter Assembly)
• Fill the reservoir
base with DuraRinse™
Humidifier Cleaner (#AC-
816), following bottle
instructions, or one 8-oz.
(250 ml) cup of undiluted
white vinegar. Let solution
stay for 20 minutes.
• Use a sponge or soft
brush to loosen any scale
residue in the reservoir
base and on the Natural
Cool Moisture™ filter
assembly.
• Rinse thoroughly with
warm, clean water to
remove scale and clean-
ing solution.
• Be sure the water tank
is empty. Fill with water
and DuraRinse™, follow-
ing bottle instructions, or
one 8-oz. (250 ml) cup of
undiluted white vinegar.
• Replace the fill cap
and shake vigorously.
• Empty the water tank
and rinse thoroughly with
warm clean water.
CLEANING