Owner`s manual

• Position the Water Tank in the humidifier and push into place. Some water
will empty into the base.
• Once the filled tank has been positioned, do not attempt to move the
humidifier. If it has to be moved, unplug the humidifier and remove the
water tank first.
CAUTION: DO NOT POUR WATER INTO THE GRILLE ON THE POWER
BASE. DOING SO MAY DAMAGE THE HUMIDIFIER OR CAUSE
PERSONAL INJURY.
FILLING CONTINUED
OPERATION
POWER
CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN
ELECTRICAL SHOCK COULD OCCUR.
• With the power switch in the OFF position, plug the filled humidifier into a
polarized 120V outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE
OUTLET; it will only fit one way.
HUMIDITY CONTROL
• Set the fan speed CONTROL to the desired
position (Fig. 4).
HIGH: For fast humidifying
NORMAL: For quieter operation
NOTE: The length of time your humidifier runs will
vary depending on the quality of construction,
room size, and insulation of your room and house,
as well as the fan speed.
• Turn the humidifier OFF if the humidity level feels too moist or you notice
condensation forming on the walls and/or windows.
• ALWAYS be sure to empty any unused water in the Remove and Rinse™
Tray and/or Water Tank each time you refill the water tank or finish using
the humidifier.
HIGH
OFF
NORMAL
Fig. 4